The SSO Protection feature is now turned off by default for testing accounts. So this manual logic for disabling the feature on each project test fixture is no longer necessary.
* Forces the AL2 build container image for fixtures that depend on it,
via `engines.node` in package.json for most cases.
* The `testDeployment()` function was updated to send
`projectSettings.nodeVersion` in the POST body, to mimic the behavior in
CLI.
* For Go, Ruby, and Python tests, the `projectSettings.nodeVersion`
property is set "globally" in the Jest setup file, so that individual
fixtures didn't need to be adjusted.
This adds some tests to the PPR implementation for Next.js. This also
fixes a bug where the static pages were incorrectly generating a header
that falsly indicated that it postponed.
Our tests rely on not being behind deployment protection which is now enabled by default so this adds a step to tests to disable this setting to allow tests to continue working as expected.
Restores DataDog flakey test detection. Briefly disabled because the old method of using exit codes would bail the entire workflow.
Taking the Turbo team's suggestion of looking at `runData.execution` values to avoid an extra loop. Now with unit tests!
- Removes some of the hacks from #10388 that were attempting to resolve an issue with RSC prefetches to `pages` routes in favor of adding rsc rewrites for all dynamic paths, and letting it fall through to a 404 if there's no match
- Fixes an issue where RSC requests were matching the wrong path (filesystem rather than RSC variant) introduced in above mentioned change
- Closes https://github.com/vercel/next.js/issues/54698
This PR is some cleanup before splitting python e2e tests.
Changes:
- use `probes.json`
- use `/api` autodetection instead of `builds` array
---
I was also trying to figure out why these tests are so much faster when run locally (293s) vs. CI (1099s). I encountered issues trying to view the build logs for the deployments that are made.
Updates the `responseHeaders` probe checks to properly test for multiple headers with the same name.
Previously the probes were using `headers.get()` which concats multiple headers into a single string, which results in the test not really checking if there are in fact multiple headers with the same name. Using `headers.raw()` allows us to properly test for that.
A couple of Python tests that were already checking for multiple `set-cookie` headers needed to be updated to match the full value, since the check now properly validates the full string match of each header (before it was basically just doing a `string.includes()` check).
This is a precursor for https://github.com/vercel/vercel/pull/9533.
When WEBrick receives `HEAD` requests it discards the body (i.e.
`req.body.nil? => true`), this causes Vercel to throw a
`BODY_NOT_A_STRING_FROM_FUNCTION` since it is expecting the serverless
function to respond with a string in the body.
---------
Co-authored-by: Nathan Rajlich <n@n8.io>
Co-authored-by: Steven <steven@ceriously.com>
Previously, our test fixtures used to use a probes prop in `vercel.json` that was removed right before it was deployed.
This PR allows a separate `probes.json` file with the same content to separate the test fixture input from the test probes.
This allows us to test real "zero config" deployments without a `vercel.json` file.
This PR update the tests suite to wait for Vercel CLI tarball and then use that tarball to run E2E tests.
This is valuable because it will package all the packages in this monorepo to make the tests follow more closely what will happen in production once merged.
Since the current "Find Changes" step takes about 2 minutes, we run that first (it happens concurrently with the tarball preparation). Then once we complete "Find Changes" we wait for the tarball but it will likely be ready by that point since it also takes about 2 minutes. After both of those steps, the E2E tests continue as usual but with the `VERCEL_CLI_VERSION` set to the tarball.
- Related to #7967
- Closes#8245
- Closes#8227
### Related Issues
Updates to the latest version of `@vercel/nft` which adds fs concurrency limits to help alleviate memory usage.
x-ref: https://github.com/vercel/nft/pull/301
### 📋 Checklist
<!--
Please keep your PR as a Draft until the checklist is complete
-->
#### Tests
- [ ] The code changed/added as part of this PR has been covered with tests
- [ ] All tests pass locally with `yarn test-unit`
#### Code Review
- [ ] This PR has a concise title and thorough description useful to a reviewer
- [ ] Issue from task tracker has a link to this PR
### Related Issues
This updates to filter the `routes-manifest` and `pages-manifest` to only include entries for the pages that are being included in the specific serverless function. This fixes the case where multiple dynamic routes could match a path but one is configured with `fallback: false` so shouldn't match when executing for a different dynamic route.
A regression test for this specific scenario has been added in the `00-mixed-dynamic-routes` fixture.
### 📋 Checklist
<!--
Please keep your PR as a Draft until the checklist is complete
-->
#### Tests
- [ ] The code changed/added as part of this PR has been covered with tests
- [ ] All tests pass locally with `yarn test-unit`
#### Code Review
- [ ] This PR has a concise title and thorough description useful to a reviewer
- [ ] Issue from task tracker has a link to this PR
https://vercel.slack.com/archives/C03F2CMNGKG/p1656971502881949
Right now, `vc deploy` automatically copies the deploy url to your clipboard after the deployment has finished. You can opt out via the `--no-clipboard` flag, but the feature is enabled by default.
This is strange behavior—there's no indication that the CLI will hijack your clipboard, and you don't know it's been hijacked until after it happens.
This PR removes the clipboard copying feature as well as the `--no-clipboard` flag.
### 📋 Checklist
<!--
Please keep your PR as a Draft until the checklist is complete
-->
#### Tests
- [ ] The code changed/added as part of this PR has been covered with tests
- [ ] All tests pass locally with `yarn test-unit`
#### Code Review
- [ ] This PR has a concise title and thorough description useful to a reviewer
- [ ] Issue from task tracker has a link to this PR
The `probes` in the vercel.json files in tests fixtures weren't allowing both `mustContain` _and_ `responseHeaders` probes due to an `else` block. This PR allows to combine those checks into the same probe test.
Node 12 is EOL and we're starting to reference packages that don't install on node lower than 14, such as nuxt@3 and remix. Let's update to 14 for now.
---
Reimplements: https://github.com/vercel/vercel/pull/7819
[cli] Add `vc build` integration test
Adds a `vc build` integration test to ensure the ncc'd CLI works as
expected to supplement the unit tests from #7869.
Co-authored-by: Steven <steven@ceriously.com>
Node 12 is EOL and we're starting to reference packages that don't install on node lower than 14, such as nuxt@3 and remix. Let's update to 14 for now.
* Migrate ava cli dev tests to jest
* remove outdated test
* update tests
* Update utils
* update stdio to fix stalling
* test stdio tests
* add debug logs
* more logs
* use strip ansi
* update
* add exit flag and fix next dev test
* update timeout for mac ci
* update cancel
* update cancel tests.yml -> test.yml
* update other ids -> names
* remove outdated test
* de-dupe scripts
* remove redwood dev test due to size
The `symlink` symlink wasn't being persisted through Turbo's cache,
so this test was failing. So move the symlink directly into the git repo
since there's no need to create it at build-time (git can store symlinks
just fine).
Additionally, the test itself was not testing that the symlink was indeed
re-created as a symlink from within the lambda environment (it actually
wasn't, due to the upload code not considering symlinks), so the test
has been updated to test for that as well.
.substr() is deprecated so we replace it with .slice() or substring() which aren't deprecated
Signed-off-by: Tobias Speicher <rootcommander@gmail.com>
Co-authored-by: Steven <steven@ceriously.com>
* refactor and add test to changelog
* group changelog into areas
* remove revert and reverted commits from changelog
* make sure Revert commits that revert a commit in a previous changelog are not filtered
* run "yarn test" as part of "yarn test-unit"
* remove advanced syntax
* remove advanced syntax
* temp changelog
* remove temp changelog
* remove global jest config
* Delete symlink
* scope jest dir to just the test files we care about
* [python] Upgrade python 3.9
* Fix python path
* Improve testing
* Add support for version selection via Pipfile
* Parse the "Pipfile.lock" instead
* Fix support for Node.js 12
